Selected work

A cross-section of jobs from our shop floor, pipe yards, offshore sites and aerospace trials. Each one links to the service behind it.

Pipe bodies cleaned and inspected at yards and rigs since 1997, reported joint by joint.

Inspection of hard-faced tool joints for cracking and wear before the string goes back into service.

Proof-load tests on cranes and lifting gear, including water bags on a spreader beam.

Hydraulic pullers apply the proof load straight to a pad eye, read from a calibrated load cell.

Workshop proof-load test of a lifting fixture with calibrated test weights.

Finite element analysis of a steel frame under a point load, before fabrication and load test.

CAD model and structural checks for a steel skid frame.

Test coupon welded and tested to qualify a welding procedure.

Surface modification of zinc alloy radiator profiles, added to our services in 2025.

A machined gauge designed and made for one specific inspection job.

A 40 µm braze layer sprayed on an airfoil with every cooling hole left open, then melted and sectioned.

Thermal imaging to locate heat loss and hidden defects without contact.

Have a similar job? Tell us about it.